# How to Nintendo 3ds custom firmware part 1(for the latest version after 11.15)

[Disclaimer]

It's not illegal to buy a Nintendo game console and convert it into a custom firmware.

Please note that the act of downloading and distributing a ROM without purchasing a genuine product may be illegal.

I will tell you in advance.In addition, damages such as errors and bricks that occur during the commissioning are your own negligence.

We tell you that it is your responsibility..

 

# How to do a Nintendo 3ds perm

In fact , one of the biggest reasons for fixing a Nintendo 3ds or psp would be the Korean patch..

Unless you are sharing or distributing a ROM, you are completely responsible for the device and game you paid for and purchased.

It is not illegal to remodel for personal use, so let's find out about 3ds customizing with line work for Korean patches.

 

# materials

 1. 3ds device (internet connection)

 2. 32 GB SD memory card

 3. File set for cofirm (uploaded in a follow-up post)

 

1. SD card (formatted in FAT32 format )  

After formatting a 32 gigabyte SD card ( a micro sd card can also be used as an  sd card adapter ) in FAT32  format

Just plug it into your Nintendo and turn it on.

 

# 64 gigabytes of 128 gigabytes can be used, but 3ds only recognizes up to 32 gigabytes.

A large capacity has the advantage of being able to load many games, but the memory card is not recognized

I personally prefer 32 gigabytes because errors often occur in the middle.

It is not that there is no way to use 64 gigabytes or 128 gigabytes, but there is no need to work separately up to 32 gigabytes.

I recommend 32 gigabytes and will post again how to apply a large capacity.

 

 

2. Check version

Depending on the version of Nintendo, the method of perm is different. Even after 3ds was discontinued, some updates

It was done and now it is 11.16. As a version, we proceed with version 11.15 here, but foreign YouTubers

Looking at the data uploaded by 11.16. The version seems to be no different from 15, so I proceeded with version 11.15. 

We will guide you through the contents. (ver.11.15.0-41k) 

 

Here's how to check your Nintendo version.

Turn on 3ds > Body Settings > Top LCD Bottom Right

 

3. Check your friend code

Go to the Nintendo Home Menu Friends List and check the Friend Code (12 digits)

Write or copy the identified number on a memo board.

 

 

4. User ID verification

Turn off the Nintendo, take out the SD card and connect it to the computer, and you will see the following folder.

If you enter the 3ds folder, an extremely long folder name will appear (32 digits) (32 digits). Enter the entire folder name here in  Notepad.

Copy. (A folder like f5a8 on the attached picture)

 

5. Access Bruteforce Movable

Bruteforce Movableaccess the site.

When you access here, the following screen appears. Enter the friend code and user ID folder name you wrote down earlier.

Just write it down or paste it.

 

After entering everything, press go at the bottom and wait for a while. Turn the Nintendo 3ds back on

Go to your friends list. If you wrote or pasted it correctly on the site

A guy sends me a friend request. Give them a rough name and register them as friends.

 

6. Download movable.sed

If you have registered as a friend, you will be directed to this screen on the site.

Click Download movable.sed to download the file and save it in an appropriate location that is easy to find.

 

7.BannerBomb3 toolconnect

BannerBomb3 toolaccess the site Select and register the movable.sed file you downloaded earlier

Click build and download to download the DSIWARE_EXPLOIT.zip  file and  extract it.

 

8. Paste the unzipped files (bb3, F00D43D5.bin)

Go to the Nintendo SD card folder.First of all, paste the bb3 file at the top. 

 

Next, go into the 3ds folder and open the existing 32 -digit id folder

Also, there is an id folder with a very long file name, and when you open that folder, inside

There is a Nintendo DSiWare folder folder.If the folder does not exist, create a new one..

( If there is an existing DSiWare folder, please empty the contents inside.).)

Inside this folder, copy the rest of the unzipped files (F00D43D5.bin) (F00D43D5.bin)

Just put it in the DSiware folder.

 

 

If you've made it this far, you're basically done with the basic settings for curling.

Next, install the curl perm program that needs to be set along with finishing the curl perm. 

Let's proceed.